Blog
How to check the oil quality of F series reducer
Release time:
2022/12/07
In order to ensureF series reducerIn the use of the process to get good lubrication, should pay attention to check its oil quality, the main inspection methods are as follows:
1. Cut off the power supply, wait for the F series reducer to cool down, place the oil pan under the oil drain bolt, open the oil level bolt, the oil drain bolt and the air hole to drain the oil, wait for all the oil to be drained, then install the oil drain bolt and inject new lubricating oil.
2. The brand and model of the new lubricating oil should be consistent with the original lubricating oil, and the amount of oil should be consistent with the installation position. When the oil reaches the specified amount through the oil level bolt, tighten the oil level bolt and the inflator.
The lubricating oil in the F series reducer may deteriorate for various reasons after being used for a period of time, so the oil quality should be checked regularly according to the above methods.
The use of F series reducer common sense
Pay 1. attention to the construction of the installation site of the F series reducer. When installing the F series reducer, the ground should be flat and the ventilation conditions should be as good as possible. You should know that the installation location will have a great influence on the use of the F series reducer in the future.
Pay 2. attention to the daily maintenance of the F series reducer. Don't use it casually or don't maintain it. This is a big taboo for using the F series reducer. No matter how good the equipment is, if it is not maintained, the service life will be reduced by at least 1/3. Therefore, daily maintenance is particularly important. The daily maintenance of the F series reducer includes: the use and replacement of lubricating oil, and check whether the installation foundation, seals, transmission shaft, etc. are in good and normal, as well as the maintenance of important parts such as shell seals, the gear box cleaning and maintenance machine can use the original oil supply and discharge system of the gear box and the filtered old oil to clean the gear box, quickly filter waste oil, add new oil and other functions, and do not change during operation Hardware facilities and cleaning agents ensure the safe operation of the gear box and extend the service life.
Pay 3. attention to the maintenance of the reducer when it is out of service. When the F series reducer is stopped, the user should not ignore it. Just like a car, it is no problem to drive every day. However, if you want to drive again in the wind and sun for a year, you must go to the garage first. During the idling period, you should regularly check and maintain the reducer according to the requirements of the instructions. When you reuse it, you can start using it without accidents.
Previous Page
Latest information