Blog
Matters needing attention in the running-in period of F series reducer
Release time:
2022/11/17
F series reducerAfter leaving the factory, the general provisions of about 200 hours of running-in period (more than the time must change the oil), which is the reducer in the early use of the technical characteristics of the provisions, the running-in period is to ensure the normal operation of the F series reducer, reduce the failure rate, an important link to extend its service life, the reducer to provide the following preventive measures:
1. Reasonable selection of lubricating oil, especially for geared motors with input power greater than 11KW, should be injected with medium-load gear oil. Frequently check lubricating oil, hydraulic oil, coolant, oil level and oil quality, and check the tightness of the whole machine. If there is too much oil shortage during inspection, the reasons should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended to add grease at the lubrication point every week during the running-out period (except special requirements), when the F series reducer with vertical oil pump is powered on, pay attention to the direction of rotation of the oil pump. Clockwise rotation is correct.
2. Keep the geared motor clean, adjust and tighten the loose parts in time to prevent the parts from being worn or lost due to looseness.
3. After the running-in period is over, perform mandatory maintenance, inspection and adjustment on the machine, and pay attention to oil change and worm gear F series reducer.
In short, the running-in period of F series reducer use and maintenance requirements can be summarized as follows: strengthen training, reduce the load, pay attention to inspection, strengthen lubrication, as long as we pay attention to and according to the requirements of the implementation of F series reducer running-in period of maintenance, will reduce the occurrence of early failure, prolong the service life, improve production efficiency, make F series reducer bring more benefits.
What role does the reducer play in life
With the F series reducer, the work efficiency of the entire production can also be improved. As long as we can handle these tasks well, it will definitely help our own development. Therefore, the use of these devices is very important for us.
Reducers are widely used, as long as F series reducers are usually used in the machinery industry, including solar energy industry, textile machinery industry, lifting machinery, conveyor belt machinery, etc., different industries choose different F series reducers. Some industries need small size, exquisite appearance, long service life, waterproof, strict requirements on the technical accuracy of the reducer, and there are not too many restrictions on some industries, as long as the F series reducer can be used in work, can achieve good efficiency in the work, compared with the previous way of working, with these equipment, the whole production can save more labor, so that when using the equipment can bring good help to the production.
Previous Page
Latest information