Blog
What is the classification of the four series reducer
Release time:
2022/06/30
Four series reducerThe development prospect of the industry is very good, because in the use of the benefits for the enterprise more, so deeply favored by customers, in order to make you more familiar with, then tell the next four series of reducer classification specific which, hoping to bring help to more people.
The four series reducer is usually said to be the hard tooth surface reducer in the reducer industry products, which can be divided into four series, namely FC series, RC series, SC series and KC series. Among them, KC series and SC series reducers are similar in appearance, but they are different in structure. Moreover, due to the different structures, the materials used are also different, and the costs caused by KC series and SC series are also different, which determines that everyone should choose according to the prevailing operating conditions when purchasing. RC series is recognized as a more direct reducer than other machines, because its official full name is coaxial gear reducer, coaxial reducer relatively good advantage is more convenient to install, at the same time adaptability is also strong, in the operation of reliable and durable, high overload capacity. We have a rule in naming the models of R series gear reducers, that is, the basic type digital model reduction ratio motor model (frame number) motor pole number installation orientation. And look at the model number letter combination can let you see the index of R series gear reducer.
The structure of the KC series reducer is relatively complicated. Although the bevel gear is characterized by noise reduction, shock absorption, light weight, low cost, etc., it is conducive to improving the overall carrying capacity and tool life. Sometimes it is necessary to match the customized spline hollow shaft, and sometimes it is necessary to install the hollow shaft locking plate on the foot. More often, it is necessary to design the flange hollow shaft. These basic types will be more complicated in operation, and the parts need a little more, and the hollow shaft occupies most of them. SC series reducer is the four series of technical content. Helical gear-turbine reducer is also called right angle reducer, with self-locking function. The degree of difficulty is similar to that of the above three series. There are many basic types of FC series parallel shaft reducer. This is a parallel shaft helical gear reducer. The output mode is parallel shaft, which is generally suitable for high machining accuracy.
Previous Page
Latest information