Blog
Why should the motor use S series reducer
Release time:
2022/08/09
When the equipment is running, the load of the motor is very large, which has great damage to the motor, and the S series reducer is different, suchS series reducerThe reduction ratio is 100.S series reducer speed ratio = input speed/output speed, if it is 100. The output torque is about 100 times the input torque. When the machine is running, the load on the motor is only 1%. Moreover, if the reducer is broken, as long as the gear is replaced, the cost is much lower than that of the motor. S series reducer is also a kind of variable speed machine, but the general transmission machine is used to slow down, customarily called S series reducer, the general reducer is a fixed transmission ratio, there are adjustable, but generally graded speed regulation. It is easy to think that the car has a reducer, so the car has several gears, gasoline engine (diesel engine) and electric motor, the throttle speed can be changed, but the range of change is not large.
S series reducer is a relatively sophisticated machine, the purpose of use is to reduce speed and increase torque. There are many kinds, different models, different types have different uses. According to the transmission mode, it can be divided into gear reducer, worm gear reducer and planetary gear reducer; according to the different transmission series, it can be divided into single-stage reducer and multi-stage reducer.
In the current mechanism used to transmit power and motion, the reducer has a wide range of applications. The application of the reducer can be seen from the high-power transmission work to the small load and precise angle transmission. In industrial applications, the reducer has the function of reducing speed and increasing torque.
The main functions of the S series reducer are: deceleration while increasing the output torque. The torque output ratio is the motor output multiplied by the reduction ratio, but it should be noted that it cannot exceed the rated torque of the S series reducer while reducing the inertia of the load.
S series reducer journal is an important and easy to wear parts of the shaft, wear will cause the rotor offset, serious will cause the rotor and the core of the brush (sweep cavity). If the wear of the journal is not too serious, a layer of chromium can be plated on the journal. If the wear is serious, it can be repaired by the hot sleeve method, that is, the trolley at the journal is 2-3mm smaller, and then the 45 steel can be repaired with a suitable sleeve with a thickness of not less than 2mn.
Previous Page
Previous Page
Latest information